UGC APPROVED ISSN 2278-1412

Archive

  Volume 13 | Issue 11

  Volume 13 | Issue 10

  Volume 13 | Issue 9

  Volume 13 | Issue 8

  Volume 13 | Issue 7

  Volume 13 | Issue 6

  Volume 13 | Issue 5

  Volume 13 | Issue 3

  Volume 13 | Issue 1

  Volume 12 | Issue 12

  Volume 12 | Issue 11

  Volume 12 | Issue 10

  Volume 12 | Issue 9

  Volume 12 | Issue 8

  Volume 12 | Issue 7

  Volume 12 | Issue 6

  Volume 12 | Issue 5

  Volume 12 | Issue 4

  Volume 12 | Issue 3

  Volume 12 | Issue 2

  Volume 12 | Issue 1

  Volume 11 | Issue 12

  Volume 11 | Issue 11

  Volume 11 | Issue 10

  Volume 11 | Issue 8

  Volume 11 | Issue 7

  Volume 11 | Issue 6

  Volume 11 | Issue 3

  Volume 11 | Issue 1

  Volume 10 | Issue 12

  Volume 10 | Issue 8

  Volume 10 | Issue 6

  Volume 10 | Issue 3

  Volume 10 | Issue 2

  Volume 10 | Issue 1

  Volume 9 | Issue 10

  Volume 8 | Issue 11

  Volume 8 | Issue 7

  Volume 7 | Issue 8

  Volume 7 | Issue 7

  Volume 7 | Issue 6

  Volume 7 | Issue 5

  Volume 7 | Issue 4

  Volume 7 | Issue 3

  Volume 7 | Issue 2

  Volume 7 | Issue 1

  Volume 6 | Issue 12

  Volume 6 | Issue 10

  Volume 6 | Issue 9

  Volume 6 | Issue 8

  Volume 6 | Issue 7

  Volume 6 | Issue 6

  Volume 6 | Issue 5

  Volume 6 | Issue 4

  Volume 6 | Issue 3

  Volume 6 | Issue 2

  Volume 6 | Issue 1

  Volume 5 | Issue 12

  Volume 5 | Issue 11

  Volume 5 | Issue 10

  Volume 5 | Issue 9

  Volume 5 | Issue 8

  Volume 5 | Issue 7

  Volume 5 | Issue 6

  Volume 5 | Issue 5

  Volume 5 | Issue 4

  Volume 5 | Issue 3

  Volume 5 | Issue 2

  Volume 5 | Issue 1

  Volume 4 | Issue 12

  Volume 4 | Issue 10

  Volume 4 | Issue 8

  Volume 4 | Issue 7

  Volume 4 | Issue 6

  Volume 4 | Issue 5

  Volume 4 | Issue 4

  Volume 4 | Issue 2

  Volume 4 | Issue 1

  Volume 3 | Issue 10

  Volume 3 | Issue 8

  Volume 3 | Issue 6

  Volume 3 | Issue 5

  Volume 3 | Issue 4

  Volume 3 | Issue 3

  Volume 3 | Issue 2

  Volume 3 | Issue 1

  Volume 2 | Issue 12

  Volume 2 | Issue 11

  Volume 2 | Issue 10

  Volume 2 | Issue 9

  Volume 2 | Issue 8

  Volume 2 | Issue 7

  Volume 2 | Issue 2

  Volume 1 | Issue 9

  Volume 1 | Issue 8

  Volume 1 | Issue 7

  Volume 1 | Issue 6

  Volume 1 | Issue 4

  Volume 1 | Issue 3

  Volume 1 | Issue 2

  Volume 1 | Issue 1

Current Volume 13 | Issue 12

A Novel Logic Style Used For Leakage Power Reduction inMOS Integrated Circuit


Volume:  5 - Issue: 04 - Date: 01-04-2016
Approved ISSN:  2278-1412
Published Id:  IJAECESTU268 |  Page No.: 987-991
Author: Abhijeet Washishtha
Co- Author: Tina Raikwar
Abstract:-Full adders are necessary parts in applications corresponding to digital signal processors (DSP) architectures and microprocessors. Additionally to its main task, that is adding 2 numbers, it participates in several different helpful operations appreciate subtraction, multiplication, division, address calculation, etc. In most of those systems the adder lies in the critical path that determines the general speed of the system. Therefore enhancing the performance of the 1-bit full adder cell (the building block of the adder) could be a significant goal. Demands for the low power VLSI approaching the expansion of insistent design process to control use severely. To accomplish the rising demand, we advise a new low power adder by give up the MOS transistor calculate that reduce the grave threshold defeat so anew enhanced 14T CMOS l-bit full adder cell is specified in this paper. Results show five hundredth improvement in threshold loss drawback, 45% improvement in speed and considerable power consumption over the given adder and other different types of adders with comparable presentation
Key Words:-Arithmetic circuit, full adder, multiplier, low power, very Large-scale integration (VLSI)
Area:-Engineering
Download Paper: 
Preview This Article

Unable to display PDF file. Download instead.


Download Paper

Downlaod Paper

No. of Download

000180

Impact Factor

7.4


ijaece

Upcoming Events


Special Issue For Paper


Upcoming Conference


Call For Paper